TiO2与ZnO复合纳米结构电极的光电化学研究

利用尿素加压共沉淀法以Ti(SO4)2与Zn(NO3)2为原料制备了TiO2-ZnO复合纳米粒子, 其纳米结构电极的光电化学研究结果表明, 反应物摩尔比为3∶1, 于530 ℃煅烧制备的复合纳米结构电极的光电转换效率最高. 对吸附染料RuL2(SCN)2∶2TBA的纳米结构TiO2和各种复合纳米粒子的纳米结构电极进行光电研究的结果表明, 染料对各纳米结构电极都起到了敏化作用, 其中也是由反应物摩尔比为3∶1, 于530 ℃煅烧制备的纳米结构电极的光电转换效率最高. 对聚3-甲基噻吩修饰的纳米结构TiO2和摩尔比为3∶1, 于530 ℃煅烧的复合纳米粒子构成的纳米结构电极进行光电性能研究, 结果表明, 聚3-甲基噻吩与半导体纳米粒子之间存在p-n结, 在一定条件下p-n结的存在有利于光生电子/空穴的分离, 从而提高了光电转化效率.     

Palladium-catalyzed cross-coupling reaction of alkynylzincs with benzylic electrophiles

The reaction of alkynylzinc bromides with benzyl bromides or chlorides in the presence of a catalytic amount of Pd(DPEphos)Cl₂ in THF at 23 °C cleanly produces the corresponding benzylated alkynes in 73-97% yields. With 10⁻³ mol % of Pd(DPEphos)Cl₂, the maximum turnover number of 7.1 × 10⁴ has been observed for the formation of PhCCCH₂Ph.     

(XN)4R4簇合物的结构与化学键

用密度泛函理论,在B3LYP/6-311G水平上,对(XN)4R4 (X=C,Si,Ge;R=H,CH3,NH2,OH)及合成的先驱化合物(XN)2R2进行几何构型、电子结构、振动频率和化学反应焓变等进行了研究.结果表明,(RCN)4比(CNR)4更稳定.所有簇合物的零点能EZP值,R=H时最小,R=CH3时最大,R配位原子依次为C、N和O时,EZP值逐渐减小.     

(R)-2-羟基-4-苯基丁酸乙酯的合成

综述了血管紧张素转化酶抑制剂类治疗高血压和充血性心力衰竭药物的关键中间体（R）－2－羟基－4－苯基丁酸乙酯的合成方法。参考文献25篇。     

Cobalt(II) and nickel(II) complexes of a cyclam derivative as carriers in iodide-selective electrodes

The ligand 1,4,8-tri(n-octyl)-1,4,8,11-tetraazacyclotetradecane (L¹) containing pendant octyl groups has been synthesised. L¹ is a tetraazamacrocycle derived from the well-known cyclam unit, and the Ni²⁺ and Co²⁺ complexes, [Ni(L¹)]²⁺ and [Co(L¹)]²⁺, have been isolated and characterised. The ability of the nickel(II) and cobalt(II) complexes to act as anion receptors has been studied by using them as ionophores in membrane-based ion-selective electrodes (ISEs). The PVC membrane containing the complex [Ni(L¹)]²⁺ and 2-nitrophenyloctylether as plasticizer shows a Nernstian response against iodide in a concentration range from 1×10⁻¹ to 4×10⁻⁵ M I⁻ with a detection limit of 1.6×10⁻⁵ M I⁻ and a slope of 58.6 mV/pI⁻ at pH 7 (25 °C). In comparison, the electrode containing [Co(L¹)]²⁺ as ionophore gave a sub-Nernstian slope and a low lifetime. A comparison between the iodide-selective electrode containing [Ni(L¹)]²⁺ and other reported iodide-selective electrodes is also reported.     

Formation of polymeric micelles with amino surfaces from amphiphilic AB‐type diblock copolymers composed of poly(glycolic acid lysine) segments and polylactide segments

Amphiphilic AB‐type diblock copolymers composed of hydrophobic poly(L ‐lactide) (PLA) segments and hydrophilic poly(glycolic acid lysine) [poly(Glc‐Lys)] segments with amino side‐chain groups self‐associated to form PLA‐based polymeric micelles with amino surfaces in an aqueous solution. The average diameter of the loose core–shell polymeric micelles for poly(Glc‐Lys) [number‐average molecular weight (M_n) = 1240]‐b‐PLA (M_n = 7000) obtained by a dimethyl sulfoxide/water dialysis method was estimated to be about 50 nm in water by dynamic light scattering measurements. The size and shape of the obtained polymeric micelles were further observed with transmission electron microscopy and atomic force microscopy. To investigate the possibility of applying the obtained PLA‐based polymeric micelles as bioabsorbable vehicles for hydrophobic drugs, we tested the entrapment of drugs in poly(Glc‐Lys) (M_n = 1240)‐b‐PLA (M_n = 7000) micelles and their release with doxorubicin as a hydrophobic drug. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1426–1432, 2002     

Alternativ-Liganden. XXII. Rhodium(I)-Komplexe mit Donor/Akzeptor-Liganden des Typs Me2PCH2CH2SiXnMe3−(X = F,Cl, OMe)

Alternative Ligands. XXII. Rhodium(I) complexes with Donor/Acceptor Ligands of the Typs Me₂PCH₂CH₂SiX_nMe_3?n(X = F, Cl, OMe) Donor/acceptor ligand of the type Me₂PCH₂SiX_nMe_3?n react with [Rh(CO)₂Cl]₂ ( 1 ) to give the mononuclear complexes RhCl(CO)(PMe₂CH₂CH₂SiX_nMe_3?n)₂ ( 2-6 , Table 1) with planar geometry of the donor atoms, one exception being Me₂PCH₂CH₂CH₂SiCl₃, yielding the crystalline Rh^III-complex RhCl₂(CO)(PMe₂CH₂CH₂SiCl₂)(PMe₂CH₂CH₂SiCl₃) ( 7 ) by oxidative addition of one of the SiCl bonds to the Rh¹ precursor. Structures with Rh → Si interaction between the basic central atoms and the acceptor group SiX_nMe_3?n could be detected in the isolated products neither spectroscopically nor by X-ray diffraction of the two representatives RhCl(CO)(PMe₂CH₂CH₂SiF₃)₂ ( 2 ) and RhCl(CO)[PMe₂CH₂CH₂siF₃]₂ ( 2 ) and RhCl(CO) [PMe₂CH₂CH₂Si(OMe₃]₂ ( 6 ). The presence of such acid/base adducts in the reaction mixture is indicated for the more acidic acceptor groups SiX_nMe_3?n byv_co values near 1990cm^?1, (see Table 3). The complex RhCl(CO)PMe₃)(PMe₂CH₂CH₂SiF₃ ( 8 ) is obtained by the reaction of RhCl(CO)(PMe₃)₂ ( 9 ) with Me₂PCH₂SiF₃ and has been identified spectroscopically in a mixture with 2 and 9 .     

Some Properties and Thermal Decomposition of Yttrium and Lanthanide Benzohydroxamates

The conditions of formation and some properties of yttrium and lanthanide benzohydroxamates were studied. Simultaneous TG-DTG-DTA studies under non-isothermal conditions were carried out in air atmosphere in the temperature range 20-1000°C. The IR spectra and X-ray patterns of some thermal decomposition products were recorded. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation and characterization of trans-RhCl(CO)(TPPTS)2-intercalated layered double hydroxides

trans-RhCl(CO)(TPPTS)₂ (TPPTS=tris(m-sulfonatophenyl)phosphine) has been intercalated into Zn-Al layered double hydroxides (LDHs) by the method of ion exchange. The structure, composition and thermal stability of the composite material have been characterized by powder X-ray diffraction, Fourier transform infrared and ³¹P solid-state magic-angle spinning nuclear magnetic resonance spectroscopy, elemental analysis, thermogravimetry, and differential thermal analysis. The geometry of trans-RhCl(CO)(TPPTS)₂ was fully optimized using the PM3 semiempirical molecular orbital method, and a schematic model for the intercalated species has been proposed. The thermal stability of trans-RhCl(CO)(TPPTS)₂ is significantly enhanced by intercalation, which suggests that such materials may have prospective application as the basis of a supported catalyst system for the hydroformylation of higher olefins.     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.